The Slitters can be used either “in-line” or “off-line”. In “in-line” use, the Slitter is placed between the printer output and the Label Rewinder. The slitting speed is determined by the printer output speed. In “off-line” use, the Slitter is placed between a UCAT Unwinder and a CAT-2 Rewinder. Off-line slitting is recommended for production work or for use with three or more blades. With slitting speeds up to 76cm/sec (30-ips) in “off-line” mode, you’ll make fast work of your slitting jobs.

An optional six- (6) digit PC-1 Pre-set Counter allows you to pre-set the number of labels to be slit. When the counter reaches the preset number, it sends a “HALT” signal to the Rewinder. Power to the Rewinder motor is then shut off and braking is applied. You’ll have no annoying label spills to contend with.

The S-100-SP Self-Powered Label Slitter

The new S-100-SP Self-powered Label Slitter simplifies label slitting by providing powered pinch rollers to pull the labels through the cutting blades rather than having to rely on a Label Rewinder to pull the labels. This results in a constant cutting speed and means you can use any LABELMATE Rewinder equipped with a “Quick-Chuck” to do your rewinding. You adjust the slitting speed right on the S-100-SP. Because the S-100-SP is self-powered, you can reliably use more cutting blades than on a Slitter that is powered by a Rewinder. You can add additional BH-1 Blade Holders for a total of five across the maximum label width of 175-mm (6.9”). The new S-100-SP is a great choice for you label needs.

The easily replaced slitting blades are click-adjustable, maximizing their useful life. Special, very sharp, ground steel blades are supplied with the S-100, S-200 and S-100-SP and are recommended for replacement. No tools are required for blade adjustment or replacement. During slitting, the blades are stabilized with LABELMATE’s proprietary system, giving a clean cut at all speeds. Rugged, heavy-gauge welded steel construction and precision parts yield a product of the highest quality.

The S-100, S-200 & S-100-SP feature a 3-Year Parts and Labour Limited Warranty, the longest in the industry.

INDIVIDUAL SLITTERS

MODEL	DESCRIPTION	LABEL WIDTH(mm)	SPEED(mm/sec)
S-100	Heavy-Duty Label Slitter. Requires a CAT-2 Rewinder. Recommended: CAT-2-CHUCK with HD-PS.	170	760
S-200	Wide Heavy-Duty Label Slitter. Requires a CAT-2 Rewinder. Recommended: CAT-2-10-INCHES with HD-PS.	255	760
S-100-SP	Self-powered Slitter Unit with 90-250VAC, 50-60Hz, 60VA Universal Power Supply.	175	300

SLITTING STATIONS

MODEL	DESCRIPTION INCLUDES ALL YOU NEED EXCEPT LABELS & CORES	LABEL WIDTH(mm)	SPEED(mm/sec)
S-100S	- UCAT-S Economy Heavy-Duty Label Unwinder with fixed brake; - S-100 Heavy-Duty Label Slitter; - 2 Blade Holders with Blades; - CAT-2-CHUCK Heavy-Duty Rewinder; 76mm diameter ‘Quick-Chuck’ is Standard; specify if 38, 40, 44 or 70mm diameter is desired instead. - 1 Aluminium and 2 Thin Plastic Separator Plates; - ‘LINK’: Adjustable Locking Bar to lock units together in position, - Heavy-Duty Power Supply	170	760
S-200S	Wide Heavy-Duty Label Slitter. Requires a CAT-2 Rewinder. Recommended: CAT-2-10-INCHES with HD-PS.	255	760

LABEL SLITTERS S-100, S-200 & S-100-SP OPTIONS

MODEL	DESCRIPTION	LABEL WIDTH(mm)
PC-1	Preset counter. Counts label batch size. Stops Rewinder automatically when job is finished. For S-100 & S-200. Factory installed.	Any
PC-2	Optional 6-digit Preset counter. Counts label batch size. Stops Rewinder automatically when job is finished. For S-100-SP. Factory installed.	Any
BH-1	Additional blade holder assembly. Includes precision high-speed blade	-
HSB-10	10 precision high-speed blades for slitters.	-
LINK S-100	Adjustable locking bar to lock units together in position (Unwinder, Slitter & Rewinder).	-
LINK S-200	Same but wider.	-

Specifications are subject to change without notice.
11/2006