The MINI-CAT's are now equipped with a direction switch. Allowing to easily change the direction.
The MC-10 has a 76 mm (3?) diameter core holder. You can also use the included ?coreless rewind? feature to rewind directly on-shaft.
The MC-11 includes a precision-crafted Adjustable Core Holder that adjusts in seconds to accept any core diameter from 25- to 101-mm (1? to 4?).
Both MINI-CATs use LABELMATE?s proprietary Constant Adjustable Torque? (?CAT?) technology to achieve impressive, reliable performance at an unprecedented low price. A special motor, designed specifically for the MINI-CATs, offers bi-directional operation and trouble-free performance. A switch conveniently controls the amount of rewind force. No awkward troublesome belts or clutches are used and no speed adjustments are required. Your MINI-CAT automatically adjusts to any printer speed up to 25cm/sec (10-ips) and even allows label back-feeding automatically if your printer requires it.
The MINI-CATs have an inner label flange to keep the edge of the label web aligned as the labels are being rewound. Also available is an optional Adjustable Paper Guide (APG-MC) that mounts directly to the MC-10 or MC-11 base plate and guides the outer edge of the labels. For the MC-10, an optional plastic Outer Flange (MC-10 2ndFlange) is also available.
|
MODEL | DESCRIPTION | LABEL WIDTH(mm) | ROLL DIAM.(mm) | SPEED(mm/sec) |
MC-10 | Quality, low-cost Rewinder & Unwinder, coreless or 76mm standard. 38, 40, 44 or 70mm core rewinding on request. Bi-directional with multiple rewind / unwind force settings. | 125 | 220 | 250 |
MC-10-1 INCH | Same as above but with a 25mm core. | 125 | 220 | 250 |
MC-11 | Same as MINI-CAT-10 but with continuously Adjustable Core Holder for 25 to 101mm diameter cores. | 115 | 220 | 250 |
MODEL | DESCRIPTION (mm) | LABEL WIDTH(mm) | ROLL DIAM.(mm) |
2nd FLANGE MC-10 | Optional Outer Flange for MINI-CAT-10 only. | - | 220 |
APG-MC | Adjustable Paper Guide for MINI-CAT-10 or MC-11. Guides outer edge of label to ensure an even roll edge. | Same as Rewinder | - |
BAIL | Standard on MC-10. For rewind on shaft, no core is needed. | Same as Rewinder | - |
ACH-MC | Adjustable Core Holder for any core size from 25 to 101mm in diameter. With inner flange. | 115 | 220 |
LTO | Low Torque Option. For tension sensitive printers. (Inkjet). Factory installed. | - | - |
FOOT SWITCH | Foot Switch to start and stop the MC Rewinders. | - | - |
PS-MC | 230V - 50Hz Power Supply for MC-10 and MC-11. Included with Rewinder. | - | - |
Specifications are subject to change without notice. 11/2006 |
Head Office:
6-8 Revenge Road
Lordswood, Chatham
Kent. ME5 8UD
Tel : 01634 673168
Fax : 01634 673169
Email : sales@lynkdata.co.uk