|
Labelmate Label Slitters & Slitting Stations |
| Barcode Printers | Plastic Card Printers | Data Terminals | Barcode Scanners | Barcode Verifiers | Barcode Software | Label Software | Labels & Ribbons | Service & Support |
|
Please contact Lynk Data Systems, on 01622 882262, information on the Label Handling Products. |
 |
 |
 |
  |
|
| S-100 with PC-1 | S-200 | S-100SP | ||
 |
 |
 |
||
| S-100SP with PC-2 | S-100S | S-200S |
| The S-100 & S-200
Label Slitters
Here’s the most convenient solution for slitting and rewinding narrow labels. LABELMATE Label Slitters allow you to print small labels several across (“up”) and then slit them to the desired width. This multiplies your print efficiency by a factor equal to the number of labels across, and dramatically increases your print head life and ribbon usage efficiency. The rugged LABELMATE S-100 and S-200 are High-Speed, Heavy-Duty Label Slitters identical in construction except for size. The Slitters can be used either “in-line” or “off-line”. In “in-line” use, the Slitter is placed between the printer output and the Label Rewinder. The slitting speed is determined by the printer output speed. In “off-line” use, the Slitter is placed between a UCAT Unwinder and a CAT-2 Rewinder. Off-line slitting is recommended for production work or for use with three or more blades. With slitting speeds up to 76cm/sec (30-ips) in “off-line” mode, you’ll make fast work of your slitting jobs. An optional six- (6) digit PC-1 Pre-set Counter allows you to pre-set the number of labels to be slit. When the counter reaches the preset number, it sends a “HALT” signal to the Rewinder. Power to the Rewinder motor is then shut off and braking is applied. You’ll have no annoying label spills to contend with. The S-100-SP Self-Powered Label Slitter The new S-100-SP Self-powered Label Slitter simplifies label slitting by providing powered pinch rollers to pull the labels through the cutting blades rather than having to rely on a Label Rewinder to pull the labels. This results in a constant cutting speed and means you can use any LABELMATE Rewinder equipped with a “Quick-Chuck” to do your rewinding. You adjust the slitting speed right on the S-100-SP. Because the S-100-SP is self-powered, you can reliably use more cutting blades than on a Slitter that is powered by a Rewinder. You can add additional BH-1 Blade Holders for a total of five across the maximum label width of 175-mm (6.9”). The new S-100-SP is a great choice for you label needs. The easily replaced slitting blades are click-adjustable, maximizing their useful life. Special, very sharp, ground steel blades are supplied with the S-100, S-200 and S-100-SP and are recommended for replacement. No tools are required for blade adjustment or replacement. During slitting, the blades are stabilized with LABELMATE’s proprietary system, giving a clean cut at all speeds. Rugged, heavy-gauge welded steel construction and precision parts yield a product of the highest quality. The S-100, S-200 & S-100-SP feature a 3-Year Parts and Labour Limited Warranty, the longest in the industry. |
|
MODEL
|
DESCRIPTION
|
LABEL WIDTH(mm)
|
SPEED(mm/sec)
|
|
S-100
|
Heavy-Duty Label Slitter. Requires a CAT-2
Rewinder.
Recommended: CAT-2-CHUCK with HD-PS. |
170
|
760
|
|
S-200
|
Wide Heavy-Duty Label Slitter. Requires a
CAT-2 Rewinder.
Recommended: CAT-2-10-INCHES with HD-PS. |
255
|
760
|
|
S-100-SP
|
Self-powered Slitter Unit with 90-250VAC,
50-60Hz, 60VA Universal Power Supply.
|
175
|
300
|
|
MODEL
|
DESCRIPTION
INCLUDES ALL YOU NEED EXCEPT LABELS & CORES |
LABEL WIDTH(mm)
|
SPEED(mm/sec)
|
|
S-100S
|
- UCAT-S Economy Heavy-Duty Label Unwinder
with fixed brake;
- S-100 Heavy-Duty Label Slitter; - 2 Blade Holders with Blades; - CAT-2-CHUCK Heavy-Duty Rewinder; 76mm diameter ‘Quick-Chuck’ is Standard; specify if 38, 40, 44 or 70mm diameter is desired instead. - 1 Aluminium and 2 Thin Plastic Separator Plates; - ‘LINK’: Adjustable Locking Bar to lock units together in position, - Heavy-Duty Power Supply |
170
|
760
|
|
S-200S
|
Wide Heavy-Duty Label Slitter. Requires a
CAT-2 Rewinder.
Recommended: CAT-2-10-INCHES with HD-PS. |
255
|
760
|
|
MODEL
|
DESCRIPTION
|
LABEL WIDTH(mm)
|
|
PC-1
|
Preset counter. Counts label batch size.
Stops Rewinder automatically when job is finished.
For S-100 & S-200. Factory installed. |
Any
|
|
PC-2
|
Optional 6-digit Preset counter. Counts
label batch size. Stops Rewinder automatically when job is finished.
For S-100-SP. Factory installed. |
Any
|
|
BH-1
|
Additional blade holder assembly.
Includes precision high-speed blade |
-
|
|
HSB-10
|
10 precision high-speed blades for
slitters.
|
-
|
|
LINK S-100
|
Adjustable locking bar to lock units
together in position (Unwinder, Slitter & Rewinder).
|
-
|
|
LINK S-200
|
Same but wider.
|
-
|
| Specifications are subject to change without notice. 11/2006 |
|
The above products are a sample of the Labelmate label handling range, please call for more information on the full Labelmate range, accessories, supplies & service. |