HHP Scanners_IT3800ESD

HHP IT 3800ESD

Barcode Printers

Plastic Card Printers

Data Terminals

/data/14ff1ae1-afe1-48f0-a9a6-7fe77fdd3510.jpg

The IT™ 3800ESD is a high performance bar code reader designed for the stringent requirements of clean room assembly of sensitive electronic components.

The IT3800ESD is constructed of conductive materials engineered to eliminate the build up of dangerous static charge on the scanner and to quickly drain the charge from any other object with which it comes in contact. The IT3800ESD is assembled for use in a Class 100 clean room environment and is triple bagged for proper introduction into the end use environment.

Internal components of the IT3800ESD scanner are isolated from the conductive path formed by the case, output connector shield, and special shielded cable with drain wire. The scanner is rated for discharges up to 15 kV without damage.

Two models are available: the IT3800VHD/ESD, which reads very high density bar codes and the IT3800LR/ESD for more typical applications.

All materials used in the IT3800ESD are tested using the methods described in ASTM D257, Standard Test Methods for Conductance of Insulating Materials. The surface resistivity is rated at less than 10E5 ohms/square. Triboelectric residual charge is measured with a non-contact Electrostatic Field Meter and is less than 5 volts on any surface.

Product Specifications

Performance

Illumination: 630 NM Visible Red LED

Receiving Device: 3648 element linear imager

Reading Distance: 1 in. (2.5 cm) to 8 in. (20.3 cm) on medium density codes

Reading Width:

5 in. (12.7 cm) code width at

7 in. (17.8 cm) distance

Resolution:

VHD: 3 mil. at 3.5 in. (8.8 cm) distance

LR: 5 mil. at 3.5 in. (8.8 cm) distance

Skew Angle: +55^o

Pitch Angle: +55^o

Horizontal Velocity: 5 in. (12.7 cm) per second

Minimum Reflectance

Difference: 30%

Scan Rate: Programmable to 270 scans per second

Decode Rate: 270 decodes per second

Mechanical/Electrical

Dimensions

Length: 5.3 in. (13.5 cm)

Height: 6 in. (15.2 cm)

Width: 3.1 in. (7.9 cm)

Weight: 6.3 oz. (179.2 g)

Housing: Polycarbonate

Power Requirements: 5Vdc + 10% at scanner

Current Draw Scanning Standby

@270 s/s 275mA 125mA

@67 s/s 150mA 125mA

Power Supply

Noise Rejection: Maximum 100mV peak to peak, 10 to 100 kHz

Environmental

Temperature

Operating: +32^oF to +122^oF (0^oC to +50^oC)

Storage: -4^oF to 140^oF (-40^oC to +60^oC)

Humidity: 0 to 95%

Mechanical Shock: Operational after 25 drops from 5 ft. (1.53 m) to concrete

Ambient Illumination: 0 - 70,000 lux

ESD Protection: Functional after 15kV discharge

Vibration: Withstands 5G peak from 20 to 300 Hz

Agency: FCC Class B, CE EMC Class B, CE Low Voltage Directive, IEC60825-1 LED Safety: Class 1, UL, cUL listed, TÜV

MTBF: per MIL-HDBK-217F Ground Benign exceeds 50,000 hours

Symbologies:

Codabar, Code 3 of 9 including PARAF, Interleaved 2 of 5, Code 2 of 5, Matrix 2 of 5, Code 11, Code 93, Code 128, UPC, EAN/JAN, China Postal Code, RSS.

Interfaces:

All popular PCs and terminals via keyboard wedge, keyboard replacement/direct connect, Apple ADB, USB, TTL level serial wedge, TTL level RS-232, wand emulation mode, and includes (HHLC) non decoded laser compatible output.

Warranty: Five year factory warranty.

Lynk Data Systems Ltd is a dedicated barcode company specialising in barcode systems and solutions. Our product range includes barcode label printers (from most printer manufacturers including Zebra, Datamax, Printronix, TEC etc.), label creation software (e.g. Codesoft from Teklynx), barcode scanners (laser scanners & CCD scanners), fixed position scanners, data collection terminals (rf radio frequency, batch and fixed mount) warehouse management systems and labelling guns for hand held applications. We also supply barcode labels and thermal transfer ribbons and provide a full label printer repair service.