HHP Barcode Verifiers - PC600 Series

HHP QC PC600 Barcode Verifier

The Quick Check PC600 Series

The Quick Check® PC600 Verifier is a professional, quality control tool for verifying the readability and standards compliance of printed bar codes. It consists of a Windows®-based software package, a “mouse” wand or pen wand bar code optical sensing device, and an interface that connects to the serial port of an IBM compatible desktop or laptop PC. The Quick Check PC600 Verifier provides quick and easy-to-view full ISO/IEC test parameter analysis and traditional pass/fail parameters. Input is provided by either an interchangeable mouse wand or pen wand that is compatible with Quick Check PC600 or 800 Series Desktop Verifiers. Because the Quick Check PC600 Verifier operates on your PC, it offers many advantages not available from standalone units. Bar code quality information is displayed directly on your computer monitor and hard copy output can be produced on any local or network printer. Automatic ISO/IEC symbol grade calculation provides instant bar code quality feedback. The Quick Check PC600 Verifier has all the power and flexibility you need to ensure strict bar code standards compliance.

Features

Easy Microsoft Windows® 98, Windows® XP, Windows® 2000, or Windows NT® Set-Up and Operation
Interchangeable Optical Input Devices
Test all Major Symbologies Against ISO/IEC or Traditional Parameters
Test UCC/EAN-128
Save Files as Data Files and/or ASCII Text Files

Mechanical

Standard Hardware

Configuration:

Interface/Input Box, power supply, and choice of mouse scanner, available in aperture sizes of 03, 05, 06, 10, 20 mils, or pen wand in 05, 06, and 10 mils. (Choose visible or infrared for either input device.)
Plugs into PC serial port

Optical Input Connector:

9-pin plastic squeeze-to-release male
Allows input from any existing or potential future Hand Held Products interchangeable scanner (excluding laser)

I/O Connector:

6-pin modular
Allows for I/O communications with computer

Power Connector:

Power jack for powering input device and interface electronics
Uses existing Hand Held Products QCAC charger

Environmental

Operating Temperature: 32 to 122° F (0 to 50° C)

Storage Temperature: 14 to 158° F (-20 to 70°C)

Relative Humidity: 5% to 95% Non-condensing

ESD Sensitivity: Withstands 20 attempts to discharge 15Kv to the unit

Sealability: Meets NEMA 1

Shock: 3 feet (91 cm) to concrete

Software

Verification Modes:

RL, RD, print contrast signal
ISO/IEC reflectance parameters
Bar/Space dimensional measurement
Average bar growth/shrinkage
ISO/IEC decodability
ISO/IEC 10-scan grade averaging
Wide-To-Narrow ratio measurements
Scan profiles on CRT and printer output
Fixed message length testing
"X" dimension calculation
Scan speed variation indication
Variable or ISO/IEC symbol grade averaging
Storage of scan results and scan profiles
Ability to add notations to scan file for later retrieval

Programming Procedures: Report generator allows choice of print format. Click directly on a parameter to configure its setting

Verification Methods: Parameters determined by the ISO/IEC print quality standard or traditional pass/fail criteria

Result Indications:

Visual, using an efficient graphical display
Audible using the PC speaker

Display Organization:

Symbol Grade with Running Average
Scan Grade
Symbology and Symbol Data
Reflectance measurements, including RL, RD, Print Contrast, Rmin/Rmax, Minimum Edge, Contrast, Modulation, and Defects
Format parameters, including Check Digit and Message Length
Dimensional results, including Decodability, Intercharacter gap, Wide-To-Narrow Ratio, and Average Bar Error
Additional results and errors are available in a scrolling list

Symbologies Verified:

Code 39 (1 to 49 characters); Interleaved 2 of 5 (2 to 78 characters);

EAN/UPC (-A, -E, -8 and -13) includes magnification settings in a maximum of 16 steps

consisting of: 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 130, 140, 150, 160, 180 and 200%;

Codabar (1 to 61 characters); Code 128 (1 to 70 characters); Telepen

Applications: UCC/EAN-128

Safety/Regulatory

FCC Class A, CE

IBM is a registered trademark of International Business Machines, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Features

• Custom liquid crystal display (LCD)

• LCD line scrolling

• LCD image flip (left or right hand use)

• Traditional test method

• ANSI/CEN/ISO scan profile test method

• Instant "On-Screen" ANSI/CEN/ISO grade

• ANSI/CEN/ISO 10-scan grade averaging

• Special reflectometer mode

• Auto-discrimination of nine codes

• "X" dimension determination

• Detailed hard copy printout with optional printer

• Automatic power off

• Selectable beeper volume/pitch

• Data buffer: 20 bar codes

Accessories

Part Number	Description
QCAC	120 volt AC charger for all QC verifiers(U.S.)
QCAC220A	220 volt AC charger for all QC verifiers (UK, Hong Kong)
QCAC220B	220 volt AC charger for all QC verifiers (Europe, Asia)
QCB	Rechargable NiCad batteries (pkg of 4) for use with QC600/800 series
622299	Pen wand; 10 mil visible red
622301	Pen wand; 5 mil visible red
622302	Pen wand; 6 mil visible red
MOUSE10MIR	Mouse wand; 10 mil infrared
MOUSE10MVR	Mouse wand; 10 mil visible red.
MOUSE20MIR	Mouse wand; 20 mil infrared
MOUSE20MVR	Mouse wand; 20 mil visible red.
MOUSE3MIR	Mouse wand; 3 mil infrared
MOUSE3MVR	Mouse wand; 3 mil visible red
MOUSE5MIR	Mouse wand; 5 mil infrared
MOUSE5MVR	Mouse wand;5 mil visible red
MOUSE6MIR	Mouse wand; 6 mil infrared
MOUSE6MVR	Mouse wand;6 mil visible red.
QCKIT	Quick Check tools for use with your verifier, includes reference gauge (QCRG), metal ruler (QCMX), reference symbols (QCRS)
QCRF	Reflectance patch (N.I.S.T. traceable) for QC600/800 series
QCRFPG	Reflectance calibration page (N.I.S.T. traceable)
QCTRAQ	Quick Check Mouse Traq

Lynk Data Systems Ltd is a dedicated barcode company specialising in barcode systems and solutions. Our product range includes barcode label printers (from most printer manufacturers including Zebra, Datamax, Printronix, TEC etc.), label creation software (e.g. Codesoft from Teklynx), barcode scanners (laser scanners & CCD scanners), fixed position scanners, data collection terminals (rf radio frequency, batch and fixed mount) warehouse management systems and labelling guns for hand held applications. We also supply barcode labels and thermal transfer ribbons and provide a full label printer repair service.