For friendly advice & assistance

Dual Spindle Unwind/Rewind Stations

Here is LABELMATE?s new Dual-Spindle Heavy Duty Unwinder / Rewinder, the TWIN-CAT-2. With two powerful motors and your choice of core holders you have maximum versatility in setting up the operation you need. Both spindles can rewind or unwind. You control the direction and torque on each Spindle independently. An External Halt Control allows you to STOP and START the TWIN-CAT-2 with a foot switch or other external device if desired. A worldwide universal switching power supply is included for extra power.

Here are some of the many possible applications:

  • Unwind and Rewind labels on one machine. Ideal for ?wind-in / wind-out? operations.

  • Reverse the order of serialized labels on a roll.

  • Conveniently rewind labels onto a different core size. With universal Adjustable Core Holders you can unwind from any diameter core and rewind onto any diameter core within the range of 25 to 101mm in diameter! Great for production shops with varied jobs.

  • Add the Label Inspection option to create a stand-alone Inspection Station. You can also add a Label Counter if you need one.

  • Wind small rolls of labels from larger ones.

  • Set up an off-line slitting operation with a LABELMATE S-100 or S-200 Slitter. This is more convenient than using a standard single spindle Rewinder.

  • Conveniently strip the unwanted matrix from die-cut labels for easy disposal as you rewind them in-line with your printer or off-line.

LABELMATE?s new Unwind / Rewind Stations are available in many different configurations to fit perfectly into your label production. All TWIN-CAT-2 Models operate at up to 76 cm per second.

The TWIN-CAT features a 5-Year Parts and Labour Limited Warranty, the longest in the industry.

TWIN-CAT-2 (no core holder)

ADD TWO CORE HOLDERS
FROM LIST
(MIX OR MATCH)

CORE DIAMETER
WIDTH

NUMBER OF FLANGES

1-INCH
25,4 mm (1")
155 mm
1
STANDARD
Specify 38, 40, 44, 70 or 76 mm
155 mm
2
10-INCH
Specify 38, 40, 44, 70 or 76 mm
255 mm
2
ACH-TWIN (No Mix*)

25 to 101 mm

155 mm
1
CHUCK -
C-xx*170
*Specify 38, 40, 44, 70 or 76 mm
170 mm
1
CHUCK -
C-76220
76 mm
220 mm
1
CHUCK -
C-76270
76 mm
270 mm
1
CHUCK -
C-100170
100 mm
170 mm
1
CHUCK -
C-100220
100 mm
220 mm
1
CHUCK -
C-100270
100 mm
270 mm
1
* The ACH-TWIN core holders can not be mixed with another type.
Each spindle allows rolls up to 220 mm (8.6") in diameter.


TWIN-CAT-2 LABEL INSPECTION AND COUNTER OPTIONS

The Label Inspection option, INSP-1, adds a handy Label Inspection Fixture to the side of your TWIN-CAT-2. It has two rollers over which your labels run as they are presented for inspection. You can also wind-in or wind-out at the same time as you perform the inspection operation. If you want to, when inspection is complete, you can conveniently rewind the labels back onto their original core one the same machine by just reversing the direction of the Rewind Spindles.

You can also order a PC-1 Label Counter for your inspection station. This will count the labels as they pass by a sensor mounted on the Inspection Fixture. The PC-1 counts single- or multi-across labels and you can preset a batch size. Counts up. Includes a Halt Control Cable to optionally stop your TWIN-CAT-2 automatically when your job is finished.

MODEL
DESCRIPTION
LABEL WIDTH(mm)
INSP-1
Inspection Fixture mounts in minutes on the side of your TWIN-CAT-2. Includes two rollers that your labels glide over as they are presented for inspection. Bi-directional, variable speed operation allows control over winding tightness as well. Can be started and stopped with the optional Foot Switch listed below.
Up to 155mm or 255mm (depends on the chosen shafts).
INSP-1 + PC-1
Optional Preset Counter with adjustable counter sensitivity. Conveniently pre-mounted on the INSP-1 Inspection Fixture ready to plug in and use.
-
FOOT SWITCH
Foot Switch to start and stop the TWIN-CAT-2, CAT-2 or MC Rewinders (?80 for the MC).
-
Specifications are subject to change without notice.
11/2006

Authorised Partners For

Where To Find Us

Head Office:
6-8 Revenge Road
Lordswood, Chatham
Kent. ME5 8UD

Tel : 01634 673168
Fax : 01634 673169
Email : sales@lynkdata.co.uk

Follow Us On